TROUBLESHOOTING
|
124 - It is night, why does my Classic show voltage on the input?
|
127 - Why is ENDAMPS not triggering at my ENDAMPS setting?
|
133 - GRID-TIED WITH BATTERY BACKUP CAN'T GET THE CLASSIC TO SELL POWER
|
135 - How do I test FOLLOW-ME?
|
161 - Why are my Classics not sharing the work when networked with Follow-Me?
|
162 - Why did my Classic KWh Production RESET during the day...
|
169 - How does MidNite know I over-voltaged my controller?
|
220 - How do I perform a Software Factory Restore? (VMM =Vulcan Mind Meld)
What is a VMM?
|
221 - How do I perform a HARDWARE factory Restore?
i.e. Jumper removal
|
222 - Classic will not power on, no fans and no sign of start up, what do I do?
|
223 - Classic MNGP (display screen) is blank, but the classic is on, Why?
|
224 - Classic MNGP (display screen) says "RESTING" but the sun is out, Why?
|
225 - My classic switches from Resting and Bulk MPPT repeatedly, but is producing 0 WATTS -Why??
|
226 - Classic MNGP (display screen) is showing all 0's and/or GOT COMM -Why?
|
227 - Classic MNGP (display screen) says "MODE IS OFF" -Why?
|
228 - Classic MNGP (display screen) is Fuzzy or has odd characters, Why?
|
229 - Classic MNGP (display screen) Firmware update issues, Why will it not update?
|
230 - Classic MNGP (display screen) says "OCP OFF" -Why?
|
231 - Classic MNGP (display screen) says "OCP" -Why?
|
232 - Classic MNGP (display screen) says "ARC FAULT" and is Loud/Beeping - Why?
|
233 - Classic MNGP (display screen) says "HYPER VOC" -Why?
|
234 - Classic MNGP (display screen) says "Battery Over V" -why?
|
235 - Classic MNGP (display screen) says "SET DATE AND TIME" -Why?
|
236 - Classic MNGP (display screen) is White/Dark or hard to read, Why?
|
240 - What is the PASSWORD for the classic?
|
241 - Why do the FANS run all the time, no matter what the classic is doing?
|
242 - How can I verify that the FANS work on the Classic?
|
249 - Why does my Classic HYPER VOC -PV IN raise up over Voltage on its own?
|
256 - My Classic PV IN -IN breaker is OFF or it is night, Why does the classic show voltage?
|
278 - FANS seem too loud
|
279 - Classic goes to ABSORB at too low or too high of a voltage
|
280 - Classic goes to FLOAT too early
|
281 - Classic appears to be "singing" at a high pitch or whine that varies...
|
283 - I mounted my MNGP remotely and now it will NOT power up or it blinks and still will NOT power up.
|
291 - What is a GOT COMM message?
|
292 - My Classic makes a Clicking sound, Why?
|
293 - My Classic talks to me, makes siren sounds or comical phrases, Why?
|